Help saddle bag rack
#1
#2
#3
Join Date: Aug 2013
Location: Somewhere on the Bourbon trail
Posts: 5,435
Received 1,506 Likes
on
1,076 Posts
I think this is the one for the saddlebags
https://www.hdforums.com/forum/touri...cks-pic-s.html
And for the TP
https://www.hdforums.com/forum/touri...nder-20-a.html
Good idea on the rubber feet Mike, but many have the stretched or CVO bags now.
https://www.hdforums.com/forum/touri...cks-pic-s.html
And for the TP
https://www.hdforums.com/forum/touri...nder-20-a.html
Good idea on the rubber feet Mike, but many have the stretched or CVO bags now.
Last edited by RKZen; 01-13-2016 at 01:51 PM.
#4
[QUOTE=RKZen;14739838]I think this is the one for the saddlebags
https://www.hdforums.com/forum/touri...cks-pic-s.html
And for the TP
https://www.hdforums.com/forum/touri...nder-20-a.html
Good idea on the rubber feet Mike, but many have the stretched or CVO bags now.[/QUOTE
The stretched bags are a PITA to wash when not on the bike.The rack would make it much easier and less chance of marking them up while washing.Presently I use a couple of old rubber car mats and lay the bags on their side on the garage floor.
https://www.hdforums.com/forum/touri...cks-pic-s.html
And for the TP
https://www.hdforums.com/forum/touri...nder-20-a.html
Good idea on the rubber feet Mike, but many have the stretched or CVO bags now.[/QUOTE
The stretched bags are a PITA to wash when not on the bike.The rack would make it much easier and less chance of marking them up while washing.Presently I use a couple of old rubber car mats and lay the bags on their side on the garage floor.
#5
#6
I don't recall where I found this, its not my design or work. If I could remember where I got it I would gladly give credit where credit is due.
Saddle bag storage rack
Made from 3/4" PVC and only cost about $20. You need 10- 90's, 4- tees, 4 pieces cut to 15 1/2", 8 pieces cut to 6" and 4 pieces cut to 4 1/2" and 2 pieces of 3/4" pipe insulation. Only took about 30 mins to make. Here is a couple of pics.
Saddle bag storage rack
Made from 3/4" PVC and only cost about $20. You need 10- 90's, 4- tees, 4 pieces cut to 15 1/2", 8 pieces cut to 6" and 4 pieces cut to 4 1/2" and 2 pieces of 3/4" pipe insulation. Only took about 30 mins to make. Here is a couple of pics.
#7
Thread
Thread Starter
Forum
Replies
Last Post