Tacchometer backlight is out!
Thread Starter
|
Tourer
Joined: Mar 2018
Posts: 455
Likes: 35
From: SW Ohio
I found some new info on this subject if anyone is interested. On page 8-86 in the "2003 Harley Davidson Touring Models Service Manual", while there is no picture of a 'bulb', under the "INSTALLATION" section it states: "1. Install new bulb in socket. Install boot in bulb housing." And then on from there to putting the bezel back together and such. So, that puts to rest in my mind the question of whether I have LED's or not. It appears 'not'.
EDIT: HOLD EVERYTHING FOLKS! I have misread this. It's referring to the "Indicator Lights" NOT the backlighting. I TOO need to pay more attention when reading
EDIT: HOLD EVERYTHING FOLKS! I have misread this. It's referring to the "Indicator Lights" NOT the backlighting. I TOO need to pay more attention when reading
Last edited by GittinThere; Jul 10, 2018 at 10:35 AM.
Thread Starter
|
Tourer
Joined: Mar 2018
Posts: 455
Likes: 35
From: SW Ohio
HERE'S the real and correct info guys! I even attached a pic. Zoom in and you can see the asterisk (double) at bottom of page. Looks like replace the unit or do soldering or send it for repair. Decisions decisions 😑
Thread Starter
|
Tourer
Joined: Mar 2018
Posts: 455
Likes: 35
From: SW Ohio
Originally Posted by lt1-xjs
I'd check for a loose connection first, unplug and reconnect. Then move on to the led gauge mod.
Thread
Thread Starter
Forum
Replies
Last Post
