Changing Chrome to black
Thread Starter
|
Club Member
Joined: Jun 2017
Posts: 1,149
Likes: 386
From: Indianapolis, IN
Changing Chrome to black
My 15 SGS in Morocco Gold Pearl came with Chrome everything stock. I put black Heat Shields and black Mufflers on and plan on doing some more black.
I only plan to balance out the chrome, not eliminate 100% of it, probably some black covers, black Aux lights bracket and black taillight brackets and 4 point docking stuff, maaaaybeee a black handle bar eventually
If I do the forks in Black, do they get chipped, and is the black a maintenance issue?
I only plan to balance out the chrome, not eliminate 100% of it, probably some black covers, black Aux lights bracket and black taillight brackets and 4 point docking stuff, maaaaybeee a black handle bar eventually
If I do the forks in Black, do they get chipped, and is the black a maintenance issue?
Ultimate HDF Member
Joined: Oct 2011
Posts: 5,691
Likes: 1,651
From: Olean, NY
Are you painting these things yourself?
I had a lot of stock parts powderocated for about 1/10th of what it would cost to buy the same parts in black. No issues to deal with. Powder coat is pretty tough stuff.
I had a lot of stock parts powderocated for about 1/10th of what it would cost to buy the same parts in black. No issues to deal with. Powder coat is pretty tough stuff.
Cruiser
Joined: Sep 2017
Posts: 231
Likes: 16
From: Nor Calif
Most of the parts I got were used "pull off" parts so not too costly. Tank console was an Ebay coated part, primary cover was new. Me, I dont like pulling parts off, leaving my bike exposed-open awaiting return of parts. So I locate parts, order and when they arrive, bolt them on. That way my bikes not down, and so can be ridden while awaiting parts..
Stellar HDF Member
Joined: Mar 2011
Posts: 3,482
Likes: 631
From: NorCal Rocklin
Save yourself some money and get the parts vinyl wrapped instead. That way if you want to go back to chrome, you can easily remove the wrap and not worry about dings
Trending Topics
Buddy of mine painted his fork lowers black, chipped like crazy. Got them powder coated, not one chip since. Powder coat is the way to go. Waaaay tougher.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Tourer
Joined: Nov 2013
Posts: 475
Likes: 55
From: SC
Had the lower fork powder coated gloss black on my 07 FXD and no chips in 4 years of riding. If you have someone that knows what they are doing the powder coating should hold up, every painted forks I have seen have chipped pretty bad but I am sure someone out there will disagree.
Road Master
Joined: Sep 2007
Posts: 963
Likes: 145
From: Displaced hillbilly
I have done my bike the route you’re looking to go, balance out chrome vs black. I had the front end powder coated a few years ago, and not a single issue with the finish. Just make sure you you research who you’re gonna have do it. It’s like anything else, if they don’t know what they are doing, it’s not going to last.
