That's the first thought I had but I'm not familiar with the arrangement or best way to access. I've had the dash loose to run a fixed USB cable but haven't completely disconnected and looked at the construction.
The Rushmore bikes are canbus so you have input from the switch to the BCM and output to the indicator lights from the BCM. Just a guess but I'd say the indicator lights are LED. Are the lights working and just the indicators out?
The Rushmore bikes are canbus so you have input from the switch to the BCM and output to the indicator lights from the BCM. Just a guess but I'd say the indicator lights are LED. Are the lights working and just the indicators out?
Turn signal (front and rear) as well as headlight (high and low) are totally functional.
Finally got around to ordering the replacement harness last week. Picked it up this afternoon and installed. Quick and easy plug n play but it didn’t work as expected. Dash display had nothing. The neutral indicator was illuminated even with the switch off. The turn indicators didn’t work as well as no high beam indicator. Removed and put the old one back in and it works just like before.
Dunno how it could be but did I do something wrong?