Oil pressure problem
Thread Starter
|
Road Warrior
Joined: Aug 2006
Posts: 1,440
Likes: 0
From: Columbus,Indiana/ Arecibo,Puerto Rico
Oil pressure problem
On my 06 Ultra, 10K on new engine with S&S 107 with camplate and 543 fueling cams.and 3 stage pump. Normally 99% of the time it constantly runs 32 psi hot and cold, but here lately, running a constant 2200/2400 rpm at About 64 mph for 5 miles, the oil pressure will start dropping back to 20 psi, I can back off or accelerate and it will go back to 32, what is going on???
Stellar HDF Member
Joined: Aug 2020
Posts: 3,179
Likes: 2,223
From: College Station, TX
I'd manually check the oil pressure to verify it matches your gauge. If it doesn't, I'd first replace the sending unit and go from there looking at wiring and then the actual gauge.
If it does match the reading on the gauge then I suspect the pressure relief valve is in the camplate is sticking.
Paul
If it does match the reading on the gauge then I suspect the pressure relief valve is in the camplate is sticking.
Paul
Thread
Thread Starter
Forum
Replies
Last Post
seitzler@svinet.com
Oil Archive (no new posts)
3
Nov 9, 2007 06:23 PM
