Engine Mount Question
Thread Starter
|
Tourer
Joined: Jan 2015
Posts: 420
Likes: 64
From: Southern Bear Flag
Engine Mount Question
Can I mount an engine from an 09-16 into an 07 frame? I know the rear mount through the transmission is a different width and the front lower engine mounts were changed with the frame in 09, but will the front lower mount off my stock 07 engine bolt to the lower front of an engine from an 09-16 Twin Cam?? TIA!
-Matt
-Matt
Seasoned HDF Member
Joined: Dec 2005
Posts: 20,028
Likes: 8,084
From: poway
Can I mount an engine from an 09-16 into an 07 frame? I know the rear mount through the transmission is a different width and the front lower engine mounts were changed with the frame in 09, but will the front lower mount off my stock 07 engine bolt to the lower front of an engine from an 09-16 Twin Cam?? TIA!
-Matt
-Matt
Assuming you are talking bagger drivetrain.
Thread Starter
|
Tourer
Joined: Jan 2015
Posts: 420
Likes: 64
From: Southern Bear Flag
The transmission housing is the same so the rear swing arm mount is the same. So is the engine case. The only difference is that the 08 up use a front head mount to stabilize the drive train. The head mounts are still there for 07 and earlier. The 07-16 drive train can be mounted in a 02 to 06 without issue. Left swingarm bracket might need changing. 99 to 2001 need swingarm changes. It can fit in an EVO frame but the front brake master and lower frame cross member needs lowering..
Assuming you are talking bagger drivetrain.
Assuming you are talking bagger drivetrain.
Thread
Thread Starter
Forum
Replies
Last Post
