Changing the clutch lever
Thread Starter
|
Ultimate HDF Member
Joined: Oct 2005
Posts: 7,279
Likes: 56
From: Union Bridge, MD
Changing the clutch lever
I had an accident about 3 weeks ago and have been slowly replacing parts that were damaged. I did the clutch lever Saturday night,re-assembled the switch housing and noticed my headlamps
& running lamps were no longer working. Well, the first thing I figured was a pinched wire upon re-assembly but after taking it apart again that was not the problem. I re-assembled and replaced the fuse and all works fine now. Anybody know what happened?
The service manula suggests taking out the maxi fuse before doing this procedure and now I am sure there is a reason for doing that.
& running lamps were no longer working. Well, the first thing I figured was a pinched wire upon re-assembly but after taking it apart again that was not the problem. I re-assembled and replaced the fuse and all works fine now. Anybody know what happened?
The service manula suggests taking out the maxi fuse before doing this procedure and now I am sure there is a reason for doing that.
Thread
Thread Starter
Forum
Replies
Last Post
