Engine Guard Fog Light Kit
Thread Starter
|
Road Captain
Joined: Feb 2007
Posts: 517
Likes: 0
From: Nebraska
Engine Guard Fog Light Kit
I just bought the engine guard fog light kit (part number: 68913-98B). I was looking for some install help. The instructions that come with it SUCK! Anyone done this before? How do you go about using the accessory switch instead of the little button switch they give you? How hard is the install in general?
Help me out here!
p.s. Man, I miss the search function
Help me out here!
p.s. Man, I miss the search function
Tourer
Joined: Dec 2006
Posts: 423
Likes: 0
From: Boise, ID
RE: Engine Guard Fog Light Kit
I installed mine with no instructions, maybe that why it was easy!! I took my spots off, so I just went right into those wires. I mounted the lights, got them where I wanted, marked it then took the crashbar off to drill holes and hide the wiring. I think it took me 2 hours to do the whole thing, but 20+ years out on the flightline helps.
[IMG]local://upfiles/22447/9BD06E10026C46428C9B7C2B6E0C7AB9.jpg[/IMG]
[IMG]local://upfiles/22447/9BD06E10026C46428C9B7C2B6E0C7AB9.jpg[/IMG]
Thread Starter
|
Road Captain
Joined: Feb 2007
Posts: 517
Likes: 0
From: Nebraska
RE: Engine Guard Fog Light Kit
So maybe this is not as hard as I am making it out to be? I didn't ever work on the flight line though; I worked in the command post getting the general coffee. 
Road Master
Joined: Nov 2007
Posts: 974
Likes: 0
From: Morrisville NC
RE: Engine Guard Fog Light Kit
I ran it into the accessory switch using a standard relay and the hot wire when on from the switch then drilled the engine bar and ran the wires to the lights 1 ground at the center engine guard mount and 1 lead to the relay for power on
Thread
Thread Starter
Forum
Replies
Last Post
jrobinson424
Dyna Glide Models
4
Jul 11, 2010 04:41 PM
