S&S Quick Set Up Kit
Thread Starter
|
Cruiser
Joined: May 2007
Posts: 155
Likes: 0
From: Ontario Canada
S&S Quick Set Up Kit
[blockquote]
Just read an article in the new April edition of American Iron about an S&S air intake and slip on muffler combination that is designed to work with the stock ECM and stock O2 sensors which self reprogram after about 15 minutes run time producing 10 + additional HP and 6+ ft lbs torque. No dyno testing or change in ECU reuired which by my math saves about $700.
They tried it on an 07 bagger and dynoed it before and after to show results.
Anyone familiar with this S&S setup? Sure sounds like the answer to economical performance increase and exhaust sound improvement.
[/blockquote]
Just read an article in the new April edition of American Iron about an S&S air intake and slip on muffler combination that is designed to work with the stock ECM and stock O2 sensors which self reprogram after about 15 minutes run time producing 10 + additional HP and 6+ ft lbs torque. No dyno testing or change in ECU reuired which by my math saves about $700.
They tried it on an 07 bagger and dynoed it before and after to show results.
Anyone familiar with this S&S setup? Sure sounds like the answer to economical performance increase and exhaust sound improvement.
[/blockquote]
Thread
Thread Starter
Forum
Replies
Last Post
