Handlebar question
Thread Starter
|
Road Master
Joined: Jul 2006
Posts: 755
Likes: 5
From: Long Island New York
Handlebar question
TO replace stock handlebars with chubbys 517s, HOW long or how many beers should i expect it will take? DO I send the g kids away so the Curseing isn't heard? or will it be calm and cool while i attempt this? Thanks in advance. MY Mechanical skills know the screwdriver is the longish thing, and the plyers Grip stuff. ANY tricks or shortcuts i should be aware of? tks guys
Road Captain
Joined: Feb 2007
Posts: 535
Likes: 4
From: Boca Raton, FL
RE: Handlebar question
You don't say on what kind of bike, but if you have a fairing plan on about 4 hours, assuming you have some knowledge, patience,the repair manual, and all the parts you'll need (including longer cables, i.e. clutch, throttle, brake lines, etc.). Not hard to do, but you have to remove most everything in the fairing. In some cases, you can get away with not removing the tank to replace the cables. Take pictures as you go along. Pictures will help you see how things were before you removed them and may be used to post here how you did it for the benefit of the forum members.
Thread Starter
|
Road Master
Joined: Jul 2006
Posts: 755
Likes: 5
From: Long Island New York
RE: Handlebar question
Thanks, gives me an idea how much time to set aside, FYI its a 06 roadglide, i'll post my results,
[IMG]local://upfiles/15218/8C3E964EBA454E9D86D14B8D257A1CB7.jpg[/IMG]
[IMG]local://upfiles/15218/8C3E964EBA454E9D86D14B8D257A1CB7.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
