Wild 1 508's - Wiring extensions needed?
Thread Starter
|
Banned Camp
Joined: Apr 2007
Posts: 3,176
Likes: 3
From: Simpsonville, SC
Wild 1 508's - Wiring extensions needed?
Does the wiring have to be extended when switchin' to Wild 1 508's on a '08 Road King Classic? The Wild 1 website says stock cables can be used, so I'm wonderin' if the wiring for everything, including the internal throttle, is long enough also.
Tourer
Joined: Mar 2007
Posts: 494
Likes: 0
From: Charlotte, NC
RE: Wild 1 508's - Wiring extensions needed?
Live,
I installed 518's and extended the wiring 8" but would do 10" if I did it all over. The +8 works fine, but +10 would have given it a little more slack. I changed to steel braided lines and used +4 for brake and throttle/idle. Used stock length for clutch but would use a +2 if I did it all over.
I'm not sure on the '08 TBW. This is from the Wild 1 site
http://www.wild1inc.com/rktechtips.html
I installed 518's and extended the wiring 8" but would do 10" if I did it all over. The +8 works fine, but +10 would have given it a little more slack. I changed to steel braided lines and used +4 for brake and throttle/idle. Used stock length for clutch but would use a +2 if I did it all over.
I'm not sure on the '08 TBW. This is from the Wild 1 site
http://www.wild1inc.com/rktechtips.html
Thread
Thread Starter
Forum
Replies
Last Post
Amarano25
Sportster Models
3
Jul 10, 2016 09:02 AM
