Another engine code thread...
#1
Another engine code thread...
I keep getting an engine code on my 04 Electra Glide Classic. It's code number P1353 and P1356. These are no combustion rear and front cylinder codes. I clear the code and it goes away for a while then comes back. It always happens at start up. Sometimes the engine seems like it dont want to start, like the starter is weak or something. Thats when the code pops back up. I clear it and it's gone for a while then it happens again a day or two later the same way each time. The bike runs fine, no misfires or backfiring or any noticable power loss, just a code that comes on at start up. I have replaced the plugs and wires about a month ago, but it keeps happening. Any ideas? Starter going bad maybe? Coil?
Also, when I go in to clear the code, there is another number that pops up after the code, that scrolls across the odometer, it says "Pn 32915-04" Anyone know what that number means? Cause I dont have a clue.
Also, when I go in to clear the code, there is another number that pops up after the code, that scrolls across the odometer, it says "Pn 32915-04" Anyone know what that number means? Cause I dont have a clue.
#2
Depending on what module your in while checking the codes the part number is either the ecm the speedo the tack or the tsm/tssm module.. scrolling thru from Pto S to SP then T will end with the part number. I cant remember if it does it all the time or just after you clear a code in a certain module dont worry about those unless you need one.. as far as the other codes i dont have a clue why your getting them
Dave
Dave
Thread
Thread Starter
Forum
Replies
Last Post