Tranny O-RING

Reply Subscribe

Thread Tools

Search this Thread

Mar 24, 2006 | 09:54 AM

a21m

Thread Starter

Tourer

Joined: Mar 2006

Posts: 272

Likes: 1

From: Grove City Ohio

Tranny O-RING

Anyone know what size the o-ring is on the tranny dipstick of an 05 ultra? When I changed the fluids, I found that the oil and tranny drain plugs o-rings are a #41 and you can find them at Home Depot or Lowes, rather than 0.25 each at the dealer. Thanks

Andy

Mar 24, 2006 | 10:55 AM

CHIZ53

Novice

Joined: Mar 2006

Posts: 19

Likes: 0

RE: Tranny O-RING

THANKS for the info. Every little bit helps. Don't know about the dip stick ring.

Apr 6, 2006 | 10:42 PM

a21m

Thread Starter

Tourer

Joined: Mar 2006

Posts: 272

Likes: 1

From: Grove City Ohio

RE: Tranny O-RING

Looks like a #13 is the correct size for the tranny dipstick. #6 is the one for the primary drain plug. You can find all these at home depot, usually in packs of 10, for less than $2 a pack. Hope this saves everyone a few bucks over time.

Andy

Apr 19, 2006 | 10:09 AM

SwaMan

Advanced

Joined: Nov 2005

Posts: 52

Likes: 0

From:

RE: Tranny O-RING

Thanks for the info.....but: could you have meant a #14?
I just ran across the hall to our plant tool room to "stock up" (shhhhhh!) and found that all the sizes mentioned make sense except for the #41.....it's the size of a bracelet!
Thanks again!
Frank