installed PCV. Will not start

Reply Subscribe

Thread Tools

Search this Thread

Apr 11, 2009 | 12:49 PM

mjrod

Thread Starter

Intermediate

Joined: Jul 2005

Posts: 41

Likes: 0

From: Boerne, TX

installed PCV. Will not start

I installed the PCV from Fuel Moto and the bike will not start up. No fire to the ignition, will not crank. Took off the PCV and all is well. Do I need to put the plugs into the O2 sensors before it will fire up? Any ideas>

Thanks,
Miguel`

Edited. Seems to help when you have the keys fob available. Started up perfectly, Runs great with the FuelMoto power package.LOL

Last edited by mjrod; Apr 11, 2009 at 01:50 PM. Reason: Fixed Issue

Apr 11, 2009 | 12:51 PM

RODEO

Outstanding HDF Member

Joined: Sep 2008

Posts: 2,458

Likes: 0

Did you try calling or emailing Fuel-Moto? I would start there first. He's around (Jamie) sometimes on the weekends.

Apr 11, 2009 | 01:53 PM

papifun

Outstanding HDF Member

Joined: May 2008

Posts: 2,056

Likes: 2

From: Quebec,Canada

Subscribed

Apr 11, 2009 | 02:23 PM

07JakeelwoodHD

Road Master

Joined: Sep 2007

Posts: 944

Likes: 12

From: New York

Check to see if the power light is on when u power it up also its states not to start bike until unit is fully installed....maybe a bad connection

Never mind just read bottom post