I have a 2007 EGC and pull a trailer, the LED lights for the trailer are wired with a diode on each side and work fine with the bike, I installed a Kuryakn Panaeca brake/turn module and now the trailer only has running lights. The brake/turn do not work on the trailer, bike side works fine. Any ideas/fixes???????
Thanks
Doc

 

Probably going to need a load equalizer module.

 

What kind of harness are you using? Where is it plugged or soldered in, before or after the Panecea? If you are using a Kuryakyn run/turn/brake controller, be careful, they overheat.

You may want to consider a Badlands Illuminator and then you can just solder your trailer lights in behind that.

 

trailer lights are wired in before the panacea module -- that was my first guess also