I put a set of wild one 575 bars on my '08 FLHX and put +4" clutch and new ABS brake lines. I can't imagine using the stock length, but I guess it's possible.

 

I tried useing stock brake line but no matter how much we tried still came up short,the wires were fine.....

 

Thanks for all the feed back, It sounds like the stock lines/cables work most of the time. I will attempt to mount the bars with stock lines/cables for the time being and will give my feed back.

 

Well I said I would give an update, I changed out the bars last night (sorry no pics yet) but I must not have been listening when some you said that the wires get routed inside the bars, not that is was a ball buster to do but I didn't anticipate doing it. Anyway the bars are on now and the bars feel better I just need to adjust them down a little now and like every one said the clutch cable had to be rerouted and the brake line is a stretch.

Thanks every one for your input

 

I just replaced my stock bars on my 08 SG for a set of Wild 1 575s and used the stock cables. The Clutch cable seems a little tight but the mechanic seems to think it's fine. I hope this doesn't cause any problems...