Branch-Okeefe Head work
Thread Starter
|
Road Warrior
Joined: May 2008
Posts: 1,513
Likes: 6
From: SC
Branch-Okeefe Head work
I had another pair of heads ported and polished with compression releases installed at Branch-Okeefe in California. Thought I would share what theyre work looks like.
I have to remove the ones already done by Branch-Okeefe without compression releases due to the hard starting issues and eating one starter already with my 255 cams. Im sure some will say why not replace just the cams, Im a big guy and with the additional weight of the trike kit the 255 cams are best for what I need. Low rpm torque
I also had them bore my stock cylinders to 103" as well. Figured to have fresh heads, pistons and new Black Opps lifters ( Bought them from Head Quarters ) since I have 20k on the motor now
I have to remove the ones already done by Branch-Okeefe without compression releases due to the hard starting issues and eating one starter already with my 255 cams. Im sure some will say why not replace just the cams, Im a big guy and with the additional weight of the trike kit the 255 cams are best for what I need. Low rpm torque
I also had them bore my stock cylinders to 103" as well. Figured to have fresh heads, pistons and new Black Opps lifters ( Bought them from Head Quarters ) since I have 20k on the motor now
Thread
Thread Starter
Forum
Replies
Last Post
