09 FLHTCU handlebar ?
Thread Starter
|
Cruiser
Joined: Jun 2008
Posts: 104
Likes: 0
From: Vicksburg, MS
09 FLHTCU handlebar ?
Hi All,
I have done a search but not found exactly what I need. Which Harley handlebars will give 2 to 3 inches pullback and a little height as well. Aftermarket will do if that's all there is out their.
Thanks and have a good one,
Ken
(I posted this in the wrong place first but am here now).
I have done a search but not found exactly what I need. Which Harley handlebars will give 2 to 3 inches pullback and a little height as well. Aftermarket will do if that's all there is out their.
Thanks and have a good one,
Ken
(I posted this in the wrong place first but am here now).
Road Warrior
Joined: May 2007
Posts: 1,277
Likes: 4
From: Austin, TX - Some call it heaven.
Tourer
Joined: Mar 2007
Posts: 393
Likes: 1
From: East Coast
I have a 2009 Ultra Classic and ABS , changed mine to Wild1Chubbys 575 , Fly by wire works , the Clutch Cable works fine to after you re-route it in the fairing. Rewiring the switches with wire inside the handlebars buy it give much cleaner look. Mine is pictured on the web site for the handle bars to let you see what they look like. Good Luck
Tourer
Joined: Jun 2007
Posts: 440
Likes: 4
From:
Yeah what dawg said about the Khromewerks 500515's. He told me about these bars and I have them on my 09 Ultra and love them. But dont let Harley sell you a bunch of stuff you don;t need. I needed the bars I think they were like $80.00 and ONE cable I think around $ 38.00. The clutch cable I got from dawg. I did not need to extend the TBW stuff in the bars as there is enough to pull out and connect. If you need further help, dawg is the man
Trending Topics
Road Master
Joined: Dec 2006
Posts: 1,062
Likes: 0
From: Ohio
Ok Dawg give me the details of what I need to do to add these to my 2010 ultra limited. I have heated grips which I now love and want to keep... wonder if I'll need to extend the grips wires... hope not.
So what are the details of the update?
Thanks, Ralph
So what are the details of the update?
Thanks, Ralph
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Tourer
Joined: Oct 2008
Posts: 376
Likes: 27
From: Weeki Wachee, Florida
Not true at all. Your dealer is not very good...I'd go somewhere else for your maintenance. HD sells a pullback handlebar and associated parts that will allow you to install on ABS bikes. My dealer installed on my 09 over a year ago. Do a search...I listed all the part numbers over a year ago.
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,514
Likes: 3,951
From: Vermont
You would need the Khromewerks 300515's if you want the +2 sweepers, about $75. You would need a 38649-08 clutch cable, $34. You would also need a tranny side cover gasket. That's it. There is enough slack in the brake line. There is enough slack in the TBW wiring. You can use the OE sensor, or if you like you can get the 32310-08 sensor that doesn't have the little green clip depending on if you want to try and run your other wires internally.