Looking for IDS sproket

Reply Subscribe

Thread Tools

Search this Thread

Oct 7, 2009 | 12:52 PM

FLHXXHLF

Thread Starter

Tourer

Joined: Aug 2008

Posts: 442

Likes: 0

Looking for IDS sproket

I'm trying to find someone that might have a used Isolated drive system sprocket they want to sell. Or where I can get one at a good price. Harley wants way to much. Thanks for the help.

Oct 7, 2009 | 01:38 PM

SteveB FLH

Road Warrior

Joined: Oct 2007

Posts: 1,622

Likes: 0

From: South of Raleigh, and west of the coast, NC.

If you can't find a used one try Zanotti H-D online sales. I believe mine was under $200. They will also press in bearing for a minimal charge.

Oct 7, 2009 | 02:17 PM

FLHXXHLF

Thread Starter

Tourer

Joined: Aug 2008

Posts: 442

Likes: 0

Quote:

Originally Posted by SteveB FLH

If you can't find a used one try Zanotti H-D online sales. I believe mine was under $200. They will also press in bearing for a minimal charge.

Press in bearings ????? What do you mean ?

Oct 7, 2009 | 03:38 PM

SteveB FLH

Road Warrior

Joined: Oct 2007

Posts: 1,622

Likes: 0

From: South of Raleigh, and west of the coast, NC.

The IDS has a bearing that is pressed into the center for axle. They (Zanotti) pressed in mine for a nominal fee. You need to specify that at the time order is placed. They are used to this request. Also keep a periodic check of bearing. There has been a few posts of earlier bearing failure with some of the first ones done, I believe. Also keep check of isolators and there is a service bulletin that explains. Use search (on forum) to find out about both. I installed mine about 12.000 mi. ago with no problems, just check it regularly when doing service.