Made a few changes.
Thread Starter
|
Elite HDF Member
Joined: Sep 2005
Posts: 3,947
Likes: 5
From: Ontario, Canada
Made a few changes, with lots of pictures.
Hog Tunes Tweeter Pod.
A quality product, great customer service, and fairly straightforward install. Sounds awesome.
Chrome Cylinder Base Cover. Maybe a little hard to see in this picture, but it's
in there behind the Road Glide Shifter Linkage and it's shiney.
Also added Mustang Saddlebag Lid covers to hide the scratches on the top of the lids and Billet Saddlebag Latches.
They are both a little easier to see in this picture. I also added a Chrome Oil Filler Spout and a Chrome Oil Hose Cover.
Here's a better shot of them. Also covered some of the hardware with Hottoppers.
Scored a great deal on a set of Rinehart Slip-ons. I enjoy the sound of them.
Installed Braided Lines and Chrome Front Calipers.
Did the Heat Demons. The switch and indicator lights is right above the thermometer.
I put a HD garage door opener on while I had things apart. Easy to install and it works as it's supposed to, Just flip the high beam, low beam switch twice and up she goes. Or down for that matter. Since the fairing was off, I took the opportunity to install a Roger McKewn Oil Temperature Gauge where the Ambient Temperature Guage was.
I guess I'll have to get a new signature picture now.
Here's a couple of pics showing what needed to be removed.
A quality product, great customer service, and fairly straightforward install. Sounds awesome.
Chrome Cylinder Base Cover. Maybe a little hard to see in this picture, but it's
in there behind the Road Glide Shifter Linkage and it's shiney.
Also added Mustang Saddlebag Lid covers to hide the scratches on the top of the lids and Billet Saddlebag Latches.
They are both a little easier to see in this picture. I also added a Chrome Oil Filler Spout and a Chrome Oil Hose Cover.
Here's a better shot of them. Also covered some of the hardware with Hottoppers.
Scored a great deal on a set of Rinehart Slip-ons. I enjoy the sound of them.
Installed Braided Lines and Chrome Front Calipers.
Did the Heat Demons. The switch and indicator lights is right above the thermometer.
I put a HD garage door opener on while I had things apart. Easy to install and it works as it's supposed to, Just flip the high beam, low beam switch twice and up she goes. Or down for that matter. Since the fairing was off, I took the opportunity to install a Roger McKewn Oil Temperature Gauge where the Ambient Temperature Guage was.
I guess I'll have to get a new signature picture now.
Here's a couple of pics showing what needed to be removed.
Last edited by Wally; Apr 7, 2010 at 09:11 AM.
Extreme HDF Member
Joined: Apr 2006
Posts: 10,449
Likes: 46
From: Roswell, GA
Trending Topics
Thread Starter
|
Elite HDF Member
Joined: Sep 2005
Posts: 3,947
Likes: 5
From: Ontario, Canada
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
