Decel popping with PCIII USB
Thread Starter
|
Road Master
Joined: Feb 2008
Posts: 770
Likes: 4
From: Western, KY
Decel popping with PCIII USB
I've got a little decel popping with my PCIII. I'm running a fuel moto map and the bike runs great. I've researched this and found that some have suggested ading to the 0% TPS cells. One post suggested adding 15 to each cell from 1500 rpm and up. My map had mostly 5's in these cells. I changed them to 15 and it gave gave me a message that the cells were out of range. I can't remember the exact wording but it was something to that effect. Any suggestions?
Road Master
Joined: Aug 2005
Posts: 1,049
Likes: 5
From: IOWA
I had a PCIII on my 05 ultra. Had V&H exhaust and AC. The bike ran great, but also had a little decel popping. There should be some small lights on the PCIII and a button ( I think, it's been a while) Anyway you can fine tune the decel popping out with these. It should be in the directions how to do this. It worked for me.
Thread
Thread Starter
Forum
Replies
Last Post
