Changing clutch cable
Ultimate HDF Member
Joined: Feb 2006
Posts: 5,190
Likes: 5
From: Eastern Washington
Yes it works. If you already have the blocks then its worth it. No need to change out the oil if you don't have to. Also since you have an 09, you wont have any issues with the exhaust. just need to loosen the heat shields. The older bike required the removal of the exhaust
Tourer
Joined: Jun 2009
Posts: 288
Likes: 1
From: Jacksonville, AL
Tried that, won't work. It will get the bolt started out but when it gets out so far you will back into your pipe. Ended up having to use ball end t-handle allens on mine. Had to be very careful not to muff up the heads on the bolts..
Road Master
Joined: May 2009
Posts: 1,244
Likes: 3
From: Stamford, CT
I figured at some point I would have to grab the head of the bolt with my fingers or pliers.
Club Member
Joined: Jan 2007
Posts: 3,561
Likes: 1,938
From: NE Florida
Only if you have the factory headers. No need to remove the exhaust if you have true duals.
Thread
Thread Starter
Forum
Replies
Last Post
