Passing Lamp Replacement

Reply Subscribe

Thread Tools

Search this Thread

Sep 16, 2010 | 01:35 PM

paulies46

Thread Starter

Stage I

Joined: Sep 2010

Posts: 1

Likes: 0

Passing Lamp Replacement

I had to lay her down last week and bent the passing lamp on the left side of my road king classic. I can't seem to get the lamp off. Will somebody tell me how to get it off?

Sep 16, 2010 | 02:18 PM

j1mmy

Elite HDF Member

Joined: Dec 2009

Posts: 4,598

Likes: 14

From: navarre ohio

take the turnsignal off, then there is a nut holding the signal mount and passing light togeather

Sep 16, 2010 | 02:22 PM

hojones

Ultimate HDF Member

Joined: Sep 2006

Posts: 5,535

Likes: 15

From: Salem, Va.

Two allen head screws holding turn signal have to be removed. Then theres a nut under the assembly that has to be taken off and remove the wire. I usually cut the wire and use a butt end to reconnect instead of fighting the factory terminals. There is a special socket to adjust the lamp but you can also make one.

Sep 16, 2010 | 03:02 PM

Nute

Road Master

Joined: Jan 2010

Posts: 881

Likes: 13

From: ONT

I believe it's a 9/16" nut but can't swear to it. Confirm what size the nut is and buy a used one at your local pawn shop. Cut a slot in it and place the wire in the slot when you take the nut off and put the nut back on.