PCV install on 08 w/abs
#1
PCV install on 08 w/abs
just got done installing the pcv retro unit from f.m. on my o8 ultra with abs. This really turned out to be a pain in the a**. I should have tossed out the install manual that came with it because nothing fit right. I ended up with the wire harness and pc laying on top of the emc unit. took 3 times to get this right so the seat would install properly. has anybody have the honors of installing one of the units with same bike as i have. I'm not sure if its the year or abs brakes or I'm just a dumb a** and this install beat me good. took 4 hours of playing around before the bike finally started up and then I realized i forgot about 02 sensors eliminators i didnt put on. I also installed the stage 1 air filter during that time. I just
had to vent a little and post this so all could see my exciting night after work. Now i can relax with a cold one and read some posts
had to vent a little and post this so all could see my exciting night after work. Now i can relax with a cold one and read some posts
Thread
Thread Starter
Forum
Replies
Last Post