Anybody know what spline it is for the shift lever? sae j500 1/2-36? Making my own shifters and want to know for sure b4 I order the broach.

Thanks for any input!

 

I'm in the same boat now as I'm making a set for myself.....did you ever get an answer to your question?

Thanks

 

I had to replace my shaft and arm on my 16. I was told when I bought the replacements the they were up graded parts, I'm pretty sure this is a pretty common problem with the 2016's, not from stomping... One thing while tightening the bolt I found it hard to get enough torque on it using an allen wrench, Use an allen that you can put on your wrench to get to the proper torque.

 

+1

 

I put anti seize on the bolt, it acts as lubricant increases tq around 10 %. My belief us it lets you crank harder with less chance if stripping.

 

I have absolutely no idea what this person is asking.

 

I would assume that 10 years after the original post he probably figured it out.

 

the dimensions or whatever you measure splined shafts by. Probably not sold by small, medium, large.

 

diameter x spline grooves in 360 degrees

 

Did you ever find the broach dealer ? I'm in Menomonee Falls, Wi.