S/e Billet cam plate ?
Thread Starter
|
Road Master
Joined: Oct 2007
Posts: 813
Likes: 1
From: REPUBLIC of TEXAS
S/e Billet cam plate ?
I have an 06 tc88 .
Is this upgrade mainly to run gear cams ?
I'm on the fence between upgrade oil pump/chain type vs gears .
Is the upgrade cam plate used to deal with run-out issues?
I'm trying to hash out the costs.
Thanx
Is this upgrade mainly to run gear cams ?
I'm on the fence between upgrade oil pump/chain type vs gears .
Is the upgrade cam plate used to deal with run-out issues?
I'm trying to hash out the costs.
Thanx
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,473
Likes: 3,950
From: Vermont
Are you asking about the SE billet cam plate 25282-07 or the SE hydraulic tensioner upgrade kit 25284-08? If you have crank runout at .003 or less than you could go gear cams and could simply use your existing plate. If you go with the tensioner upgrade kit it gives you a better oil pump, a plate, etc.
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,473
Likes: 3,950
From: Vermont
Oh wait, I reread your post and it appears that you are asking about the plate to run gear cams. It does not address/correct crank runout. You would still need to be within spec or have it trued if out of spec. I would suggest the hydraulic upgrade kit if you are not within spec.
Thread
Thread Starter
Forum
Replies
Last Post
hogrunner25
Exhaust System Topics
5
Dec 5, 2012 09:55 AM
