Adjustable backrest issue on StreetGlide
Elite HDF Member
Joined: Apr 2005
Posts: 3,542
Likes: 2
From: Oahu, Hawaii
RE: Adjustable backrest issue on StreetGlide
That is how mine is too. I can never get it to touch the seat like Bounty's.
ORIGINAL: Richard
Mine is a bit to high also, I am going to fab the thing about 2 to 3 inches lower. Just hack off 3 inches
of the two bars, and re weld the locking pins back on...
I was looking for a smaller one, like a 3 inch tall pad, but couldn't.
[IMG]local://upfiles/11910/96270C6F69D24A2B8CE3F139D3765CA2.jpg[/IMG]
Mine is a bit to high also, I am going to fab the thing about 2 to 3 inches lower. Just hack off 3 inches
of the two bars, and re weld the locking pins back on...
I was looking for a smaller one, like a 3 inch tall pad, but couldn't.
[IMG]local://upfiles/11910/96270C6F69D24A2B8CE3F139D3765CA2.jpg[/IMG]
Outstanding HDF Member
Joined: Apr 2006
Posts: 2,282
Likes: 52
From: DFW
RE: Adjustable backrest issue on StreetGlide
I've got the adjustable backrest setup still in the box for my SG. When I realized...duh....that it wasn't going to allow me to swap out seats easily to my very low profile Mustang Daytripper, (without removing the bracket) it never left the box. Sounds like a good thing. I really wanted the adjustable though, but now it will most likey go up for sale.
Thread
Thread Starter
Forum
Replies
Last Post
