HAWK Brake Pads
Tourer
Joined: Jul 2007
Posts: 464
Likes: 1
From: NoCal
any update on the hawk pads? Did you get the sintered or organics?
Tourer
Joined: Jul 2007
Posts: 464
Likes: 1
From: NoCal
Can anyone get that discount? I see Hawk changed the part number system and the HH sintered ones are HMC5015
Stage I
Joined: Apr 2011
Posts: 1
Likes: 0
From: Phoenix, AZ
Hawk HMC400 do not fit 2000-2007 FLHR as stated. On my 2002 FLHR they are too thick and drag on the front rotors. They work fine on the rear. The Hawk Part # has been superceeded by by the HMC1015 for the organics. The HMC400 pads are larger and thicker than the stock pads and the same dimensions as pads for 05-07 except for FLSTS, FXSTS Front & XL 05-07 Front/Rear. See pg 637 in 2011 Dennis Kirk Catalog. I don't know if the HMC1015 are the same dimensions as the HMC400s were.
Thread Starter
|
Advanced
Joined: Dec 2010
Posts: 50
Likes: 0
From: Atlanta GA
I have the metallic pads with stock rotors and they have nice smooth stopping. They have a little squeal that seems sometimes but im okay with that. I give them an A+ so far. 2000 miles in no issues.
Tourer
Joined: Jul 2007
Posts: 464
Likes: 1
From: NoCal
I got two sets of HMC1015 from Summit Racing, funny in that when placed order said they were backordered to 4/8, on 4/4 received the pads and a post card saying they expected to ship on 4/8. Just put them on the front this weekend at 300 miles still to early to early to tell on dusting. Stopping though as good as EBC's FA400HH's and ~$5 cheaper per pair.
Thread
Thread Starter
Forum
Replies
Last Post
