inner cam bearings
Thread Starter
|
Tourer
Joined: Aug 2009
Posts: 297
Likes: 0
From: New York
inner cam bearings
i am putting the SE 255 in and i have heared that HD has made a SE inner race bearings for the 96 but i can t find anything on them or on there website anybody have a part # for them
Seasoned HDF Member
Joined: Mar 2009
Posts: 24,730
Likes: 9,236
From: Snow Hill, NC
B-168... Hint...If you are gonna do the Adjustable push rods don't buy the whole kit from Fuelmoto... just buy the Cam cover gasket and the bearings...Ask me how i know.... I have a buch of gaskets leftover...save a few bucks won't you.
HDF Community Team
Joined: Jun 2006
Posts: 12,776
Likes: 2,607
From: san antonio
Torrington B168s will run $15-$18 a pair from most bearing houses; lot of places, here is one.
http://www.mbsmfg.com/btoincambe1.html
These are Timken bearings; Timken acquired Torrgington in 2003.
http://www.mbsmfg.com/btoincambe1.html
These are Timken bearings; Timken acquired Torrgington in 2003.
Extreme HDF Member
Joined: Sep 2005
Posts: 11,615
Likes: 50
From: Baton Rouge, LA
Two years ago mine were $15 from a local bearing dealer including $5 for shipping. The SE part is only $15, so I think the dealer would be as good a place as any to buy them, if conveniently located.
Trending Topics
Thread Starter
|
Tourer
Joined: Aug 2009
Posts: 297
Likes: 0
From: New York
Now when installing them all i need is the tool or do i have to convert anything or buy a timikin kit or should the SE bearings go right in
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Tourer
Joined: Apr 2010
Posts: 251
Likes: 0
From: Australia
The bearing tool is all you will need for the bearings and they should go straight in without any problems. Just make sure the bearings are seated to the correct depth. I have the georges garage bearing puller/installer tool which set them to the correct depth. You probably already know this but remember to check the crank and cam sprocket face alignment, as I had to shim mine. I also bought a tap to clean out the old loctite of the threads so I got the correct tensions on the tension wrench when doing everything back up, but thats just me, fussy bastard, no leaks yet.
Last edited by bikehe; Mar 5, 2011 at 05:01 AM.