07 sg bars
Road Master
Joined: Feb 2008
Posts: 1,179
Likes: 1
From: NH
The wires are cliped to the small cross fairig brackets. After running wires thru higher handle bars, the wires will have to be connected under the radio and wire tied.
Road Captain
Joined: Jul 2010
Posts: 638
Likes: 132
I installed the WO575s without changing anything.
I had to re-route the clutch cable, but was able to do so and still have it come out the hole in the fairing where it originally came out.
Just make sure it isn't rubbing on anything. I did this with zip ties.
Re-routing will give you about two extra inches, and then you can take up the rest with the adjuster.
Mine was on a 2010 SG though.
saw
I had to re-route the clutch cable, but was able to do so and still have it come out the hole in the fairing where it originally came out.
Just make sure it isn't rubbing on anything. I did this with zip ties.
Re-routing will give you about two extra inches, and then you can take up the rest with the adjuster.
Mine was on a 2010 SG though.
saw
Thread
Thread Starter
Forum
Replies
Last Post
