Supertuner calibration file
Thread Starter
|
Road Master
Joined: Jul 2009
Posts: 1,221
Likes: 9
From: Monmouth, OR
Supertuner calibration file
The overall plan is to get the Stage II done during the winter. Currently running the stock (cat) head pipe on my 2010 FLTRX with SE Ventilator A/C and Nightstick. I'm planning on replacing the head pipe with the Jackpot 2-1 head pipe without the cat. I don't want to pay the stealership to change the pipe out. I'm currently running the bike with one of the canned calibration files and it is running fine, but once I replace the head pipe and lose the cat, I'm trying to figure out which canned calibration to get me by before the Stage II and dyno. I'm thinking it's the 009FY002.dt0 - 2010 & 2011 'All Market' Touring Exhaust with 02 Sensors Configuration: 1580 A/C & Race Exhaust.
Does that sound reasonable? Again, this is a short-term solution so I can still ride prior to the Stage II upgrade.
Does that sound reasonable? Again, this is a short-term solution so I can still ride prior to the Stage II upgrade.
Intermediate
Joined: Oct 2009
Posts: 38
Likes: 0
From: Al/FL
Calibration file
I had this exact setup on my 2010 Street Glide with the jackpot 2into1 head pipe before I put the 255 cams in. Just use the 009FY002.dt0 file and smart tuned the file. Works just great. When I put the 255 cams in, I used the 009SAH002 file, which is the 103 upgrade and just downsized the cu in to 96. I am now ready for my winter project, where I am going to go ahead and put the 103 jugs on it an have ACR's installed in my 96 heads. Also I am running an open end cap on the nightstick.
Good luck. You will like it.
Good luck. You will like it.
Thread Starter
|
Road Master
Joined: Jul 2009
Posts: 1,221
Likes: 9
From: Monmouth, OR
I had this exact setup on my 2010 Street Glide with the jackpot 2into1 head pipe before I put the 255 cams in. Just use the 009FY002.dt0 file and smart tuned the file. Works just great. When I put the 255 cams in, I used the 009SAH002 file, which is the 103 upgrade and just downsized the cu in to 96. I am now ready for my winter project, where I am going to go ahead and put the 103 jugs on it an have ACR's installed in my 96 heads. Also I am running an open end cap on the nightstick.
Good luck. You will like it.
Good luck. You will like it.
Thread
Thread Starter
Forum
Replies
Last Post
