Rear Wheel Removal Help?

GMRO · 2012-04-25 23:29:17

try this. http://partsfinder.onlinemicrofiche.com/ronnies//showmodel.asp?type=17&make=hdmc&mode

Reply Subscribe

Thread Tools

Search this Thread

Apr 26, 2012 | 05:56 PM

#11

HDstreetHOG

Intermediate

Joined: Apr 2012

Posts: 41

Likes: 0

From: Concord, Ohio

try this. http://partsfinder.onlinemicrofiche....make=hdmc&mode

Apr 26, 2012 | 09:21 PM

#12

skratch

Seasoned HDF Member

Joined: Jan 2007

Posts: 20,616

Likes: 4,440

From: anacoco, la

Quote:

Originally Posted by hockey8787

This site will you just look up your bike http://partsfinder.onlinemicrofiche....m_oem/hdmc.asp

Quote:

Originally Posted by HDstreetHOG

try this. http://partsfinder.onlinemicrofiche....make=hdmc&mode

i don't get it... he's not looking for part numbers

Apr 26, 2012 | 11:05 PM

#13

klaybus

Stellar HDF Member

Joined: Aug 2008

Posts: 2,404

Likes: 11

From: Southern Nevada (Pahrump)

Check your PM's.....

Apr 27, 2012 | 06:34 AM

#14

hockey8787

Outstanding HDF Member

Joined: Feb 2008

Posts: 2,415

Likes: 8

From: virginia

Quote:

Originally Posted by skratch

i don't get it... he's not looking for part numbers

He had asked for this,, BUT I’ve no service manual and no exploded parts view or torque specs. this has it!!

Apr 27, 2012 | 07:25 AM

#15

Guntoter

Outstanding HDF Member

Joined: Mar 2009

Posts: 2,216

Likes: 102

From: Central Illinois

Quote:

Originally Posted by DuraGlide

Rather than fooling with the exhaust, I have been removing the 2 lower shock bolts, pulling the shocks back out of the way and lowering the bike with a jack under the frame to get the axle out. Also allows you to move the swingarm up and down to get the spacers back in when they fall out on assembly.

This is good advice. It also helps immensely on removing the brake caliper and laying it outside the swingarm on removal of the wheel. After the axle is out, with the tire supported, I pulled the wheel back a little bit and worked the caliper out carefully.

Apr 27, 2012 | 07:29 AM

#16

GMRO

Thread Starter

Road Captain

Joined: Nov 2011

Posts: 505

Likes: 50

From: Russellton, PA

klaybus - just replied! Thanks again!

**

AND the TIPS - very KEWL! I'm sure the job will go much easier with the suggestions.

THANKS everyone for ALL the help. Really dig this board!