Light in dash

Reply Subscribe

Thread Tools

Search this Thread

Aug 12, 2012 | 09:49 PM

tidbit1

Thread Starter

Road Warrior

Joined: Nov 2010

Posts: 1,294

Likes: 16

From: in a van down by the river in Ga.

Light in dash

I don't ride much at night but got caught out last night and i notice that i have no light in the fuel gauge. Will that be a bulb out in the fairing or is it a fuse out???? Any help appreciated.

Aug 12, 2012 | 10:17 PM

Airborne350G

Club Member

Joined: Jun 2007

Posts: 3,435

Likes: 28

From: Living in open carry state :D

Most likely it is a bulb. It could also be just the prongs on the light are not set right. My would flicker and I removed the bulb and adjusted the prongs on the bulb and it is now good to go.

Aug 12, 2012 | 10:28 PM

steelhead

Road Master

Joined: Apr 2007

Posts: 938

Likes: 0

From: Seattle WA area

Very likely the bulb. Easy fix. You can do what some od us have done and replaced the stock bulbs with leds. More light and
Ast longer. Less than $20 for all four.

Aug 12, 2012 | 10:47 PM

stro1965

Seasoned HDF Member

Joined: Feb 2007

Posts: 10,602

Likes: 721

From: Bellevue, NE

The bulb may have just popped out of the gauge housing.

Aug 13, 2012 | 01:36 PM

tidbit1

Thread Starter

Road Warrior

Joined: Nov 2010

Posts: 1,294

Likes: 16

From: in a van down by the river in Ga.

Quote:

Originally Posted by steelhead

Very likely the bulb. Easy fix. You can do what some od us have done and replaced the stock bulbs with leds. More light and
Ast longer. Less than $20 for all four.

That sounds great using LED's. Do you have a part # and where can i find them? I already have LED's on the rear with a Badlands Module. So i would guess i would be okay.

Thanks again guys.

Aug 14, 2012 | 08:09 PM

steelhead

Road Master

Joined: Apr 2007

Posts: 938

Likes: 0

From: Seattle WA area

Go to superbrightleds.com

If you search on that as well here you will get a lot of info.

I chose the WLED-AHP5. The A is for amber. The HP was the brighter option. No load eq needed.

Aug 14, 2012 | 08:40 PM

tidbit1

Thread Starter

Road Warrior

Joined: Nov 2010

Posts: 1,294

Likes: 16

From: in a van down by the river in Ga.

Quote:

Originally Posted by steelhead

Go to superbrightleds.com

If you search on that as well here you will get a lot of info.

I chose the WLED-AHP5. The A is for amber. The HP was the brighter option. No load eq needed.

Thanks for the info. I will check them out.

7 Times Harley-Davidson Chucked Tradition Out the Window

Verdad Gallardo

7 Surprising Harley-Davidson Products that Are Not Motorcycles

Verdad Gallardo

8 Best Harley-Davidson Motorcycles Ever

Pouria Savadkouei

10 Worst Harley-Davidson Motorcycles Ever

Pouria Savadkouei

Killer Custom's Jail Break Is The Breakout That Refused to Blend In

Verdad Gallardo

Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

Verdad Gallardo

Harley-Davidson Reveals Super Cool Cafe Racer Concept

Verdad Gallardo

Engraved Rebellion: Inside Bundnerbike's Glam Rock II

Verdad Gallardo

10 Motorcycles You Should Never Buy

Joe Kucinski

10 Things Harley-Davidson Needs to Fix in 2026

Verdad Gallardo

Aug 14, 2012 | 09:30 PM

TheLazyC

Cruiser

Joined: Aug 2012

Posts: 195

Likes: 0

From: South Hill, VA

Quote:

Originally Posted by steelhead

Go to superbrightleds.com

If you search on that as well here you will get a lot of info.

I chose the WLED-AHP5. The A is for amber. The HP was the brighter option. No load eq needed.

I just placed my order for them after reading your post. I figured if I had to take it apart to check bulb, I just as well replace all of them while I was there.