Kuryakyn Run/Turn/Brake question
Thread Starter
|
Novice
Joined: Aug 2012
Posts: 22
Likes: 0
From: Port Coquitlam, BC
Kuryakyn Run/Turn/Brake question
A simple question for anyone that has the Kuryakyn Run/Turn/Brake controller (P/N 4859). When the brakes are applied and a turn signal is activated, does the turn signal simply change intensity or does it blink off/on? Thx.
Thread Starter
|
Novice
Joined: Aug 2012
Posts: 22
Likes: 0
From: Port Coquitlam, BC
"Amber LED activate" ??? I don't have LEDs; I have std. filament bulbs. Also, I believe law would require me to replace my amber lenses with red ones (such as those that come in the MoCo's kit (P/N 69461-06C).
Or am I misunderstanding you?
Or am I misunderstanding you?
Tourer
Joined: Dec 2006
Posts: 345
Likes: 40
From: Northern California
Sorry, I thought you replaced the rear lights with Kuryakyn LEDs. In that case the Run mode the rear red LEDs are active. When braking the intensity of the LED increase and when Turn is active, the red LEDs are deactivated and the amber LEDs activate and blink.
Tourer
Joined: Jan 2012
Posts: 415
Likes: 28
From: Albany
Yup...same here!
Thread
Thread Starter
Forum
Replies
Last Post
