When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
From: Orig Surfers Paradise Australia, then Riyadh Saudi Arabia, Tokyo, Toronto, now So Cal
Remap after Jackpot Header install??
Looking to install Jackpot headers (2-1-2) on 09 SG. Have stage 1 AC and V&H Monster Ovals with HD ecm remap currently (with stock headers incl CAT). Bike runs great. But will I need to remap / install PCV etc, after new headers are installed?
thanks for advice in advance.
Youre going from a stock CAT system to a non CAT system with different mufflers so the flow will be different and could affect the over all performance. It is generally recommended that when ever a change is made to a motors performance design, a correct re-tuning should be done.
I have always been a supporter of getting a tuneable EFI vs a ECM flash. Yes it does cost more up front but in the long run, may be cheaper.
This is a very highly discussed topic and i would say 50% say yes to a tuner of some kind and others will say no tuner for a simple stage 1 (exhaust/ac). If you want some more performance then yes a tuner but if your just looking to have a little more sound and open the ac up a little then no. You say you have an hd ecm remap. Are you saying you have the stage 1 download? If yes then by opening up the exhaust and ac you have now brought it back to the stock lean condition which wont hurt anything.
From: Orig Surfers Paradise Australia, then Riyadh Saudi Arabia, Tokyo, Toronto, now So Cal
Thank guys, I do have the HD stage 1 download done by LA HD. I just want a bit more exhaust noise as i find with the CAT its too quiet. Performance is fine currently (for me!) so if i put the JP Headers on you're saying that my current stage 1 download will be ok? no need to remap straight away?
thanks for fast replies guys!
Looking to install Jackpot headers (2-1-2) on 09 SG. Have stage 1 AC and V&H Monster Ovals with HD ecm remap currently (with stock headers incl CAT). Bike runs great. But will I need to remap / install PCV etc, after new headers are installed?
thanks for advice in advance.
Did you go through Fuelmoto? If so just call em up they will answer all your questions and hook you up with a new map if necessary.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.