Anyone have experience installing new switch covers on a 2009 Road King?
Thanks

 

Never done it myself but know it's a real PITA!

Edit: I thought you were talking about the chrome covers that cover the actual switch. Housings are easier from what I hear. Attached is a recent thread on the switch cover subject.

https://www.hdforums.com/forum/touri...-controls.html

Good Luck!

 

The covers that go over the existing ones? Or actual housings themselves? The housings aren't that bad if you ask me. Use the service manual and get a small magnetic screw driver. And a bright light helps too.

No cruise or audio on a RK either. Should be easy

 

Not on a road king, but On my 09 SG they were easy. Manual has a good write up. Watch the brake switch.

 

and watch were the wires are laying so you can put them back , if all goes well a piece of cake , but can be a PIA , good luck