When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone have the proper adjusting heights for this light? I lost my paperwork that came with the light. Perhaps it's aimed too high and that's why in turns it looses some.
Measure from the ground to the center of the headlight. Get back 30 feet (I think) from your aiming wall. Make a mark on the wall the same as you measured. The flat (left) part of the low beam should be even with your mark. The right side angled part of the low beam should start upwards just to the right of center.
FWIW - I used a wall only about 12 feet from the trike to adjust with and it worked out fine. You can fine tune from your adjustment too of course.
