Beefier Clutch??
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
If you are buying this as a package from a tuning shop, what do they recommend? You may need nothing more than a heavier clutch spring. There are some wonderful clutches available out there, but unless you are racing your bike, the stock clutch is pretty strong, with a little help.
To keep lever pressure down there are useful add-ons like the AIM pressure plate, which increases clutch plate pressure with speed.
To keep lever pressure down there are useful add-ons like the AIM pressure plate, which increases clutch plate pressure with speed.
Tourer
Joined: Nov 2012
Posts: 421
Likes: 71
From: Hayward Ca
I'm currently running the Rivera Pro Clutch with the silver spring. I think there is one heavier spring available but I've had zero problems or slippage and I'm putting out around 125 ft lbs of torque. My builder uses this clutch on much bigger builds than mine with no issues. The clutch pull is not much heavier than stock and the pull lightens up when you have it all the way in which is great in traffic. I really like the way it feels. I probably could have gotten by with the stock clutch and heavier spring but at 90K it was time to replace the entire clutch assembly anyway.
Thread
Thread Starter
Forum
Replies
Last Post
