When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks for the tips on this. Dealer threw in a pouch set with bike purchase, but I'm wondering about it rubbing on the windshield to the point of damage.
Thanks for the tips on this. Dealer threw in a pouch set with bike purchase, but I'm wondering about it rubbing on the windshield to the point of damage.
I worried about that too. But then decided that the odds of riding w/o the pouch set were pretty slim. If there is any damage, I'll probably never see it.
You should have gotten 3 longer screws as well. Hold the spacer in place with needle nose, start the screws, then install your shield and pouch set. Easy. I used the spacers on my pouch install. I figure they included them for a reason.
Installed the HD 3-pocket fairing pouch and it came with spacers that fit between the outer and inner fairing. Kind of makes sense as the pouch material could compress over time and allow the three windshield screws to become loose. The only problem is that they don't allow room to loosen the windshield screws to swap out different shields and I'm worried that they'll drop between the fairing halves if I pull screws all the way out. Are these spacers really necessary?
I just put mine on this past weekend. I totally get what you're saying and noticed exactly the same thing. If you read the fine print on the website, it says that if you have the chrome windshield trim and want to add the pouches, it recommends buying longer screws. The longer screws will enable you to open the space between the inner and outer fairing to remove the windshield without removing the screws and loosing the spacers. You didn't say if you had the chrome trim, but I assume you do. I didn't buy the longer screws, so it will be slightly problematic when I go to replace a windshield or remove the outer fairing. Hope this helps.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.