When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ok, went to my brothers house today and we took the primary off and it has a hairline crack between the drain plug hole and the gasket surface where it meets the outer primary cover. who ever put the drain plug in at the factory either cross threaded it or tighten it up so tight it cracked the chain case. can't believe it didn't leak, but you can see the crack on the inside and the outside. anyway it's off now and i think we are just going to have it welded up and then i'll drill and tap it and it'll be done right.
Haven't stripped a Harley plug yet, but on a couple of metrics I had I used self-tapping drain plugs whose thread pitch was slightly coarser and had no issues. If you're interseted do a search, there is a few companies that make 'em just for this purpose.
we didn't strip this one either, some dumb *** at the factory did. the only one i've ever stripped was on a 79 shovel trans drain many years ago. learned along time ago , even on dirt bikes as a kid that things that go into alum. just get snugged up. and lots of antisize.
i know they are not gonna catch everything, but it seems to be getting worse as the bikes get newer.
Folks the lack of quality control is a direct result of the tremendous market share Harley enjoys.
Now you want to see better quality control, stop buying Harley's.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.