That would be your second mistake !! Stop over at the AUDIO FORUM !! Lots of very nice & helpful folks over there !! We will guide you to getting the most BANG for your BUCK !!!

There are MANY good choices & combos out there, better quality & less money than you are spending now !!

 

I would like to thank everybody for their help. It was of great assistance. And thanks to GlacierPearl we all know who has the biggest radio!!

 

Jb weld the insert the torsque specs on all that i have taken apart have been 30 in lbs which is not alot I also learned this the hard way and jb welded it that worked till it cracked from vibration then i used the plastic weld kit you can get at auto body store a good kit and heater is around 200. but so far it has worked mine is abs

 

Is your spacer installed correctly?

 

Sounds like you got it buttoned up !!! GREAT !!!