Converted RK to RG
Thread Starter
|
Stage I
Joined: Jun 2013
Posts: 1
Likes: 0
From: North Carolina
Converted RK to RG
I have converted a 2002 RK to a 2005 RG. The frame, engine, trans are 2002 and everything else is 2005. I went from carb to EFI. All electronics are 2005. Exhaust is stock 2007 with the bung holes sealed. The AC is Arlen Ness stage 2 and the cams are S&S 510 gear driven. My problem is when starting off from a dead stop, the bike shakes the teeth out of your mouth until about 2500 rpm and smooth's out. No ***** until about 2500 rpm. There are no codes. Easy start and all seems to be work correctly. I am at a loss as this is my first EFI set up. Where do I go from here? Please help can't afford H-D prices!!!
Thanx in advance,
"Mooch"7272
Thanx in advance,
"Mooch"7272
Thread
Thread Starter
Forum
Replies
Last Post
