Issues with custom dynamic led turn sigs

Reply Subscribe

Thread Tools

Search this Thread

Sep 24, 2013 | 09:35 AM

#11

AnotherBlackSG

Outstanding HDF Member

Joined: Jul 2010

Posts: 2,979

Likes: 57

From: PA

Quote:

Originally Posted by Garemlin

Only if you run them on all four corners. If you just run them on the front or the rear it doesn't drop the current draw enough to trigger hyperflash.

Correct, I have them on the rear only and don't need the equalizer. However, that's not OP's problem.

Sep 24, 2013 | 09:41 AM

#12

RRProfessor

Cruiser

Joined: Apr 2013

Posts: 184

Likes: 118

From: Tampa

Sounds like you might have the wrong version of the LED's. the SG needs the 1157's I believe.

Sep 24, 2013 | 10:07 AM

#13

kraydog

Cruiser

Joined: Oct 2008

Posts: 243

Likes: 1

From: baltimore maryland

Thanks Garemlin,Yea I have them on all four.

Sep 24, 2013 | 10:47 AM

#14

CurtisO

Tourer

Joined: Apr 2010

Posts: 309

Likes: 0

From: Pearl River, LA

Contact Custom Dynamics. I find they are very responsive. Worth a shot.

Sep 25, 2013 | 10:46 AM

#15

MDStbob

Thread Starter

Tourer

Joined: Jul 2009

Posts: 479

Likes: 2

From: MD

They are the 1157s. All I can think is light in the center is messing it up. Not sure about the need for a equalizer, I placed them in my buddies street glide and they didn't work either. Damn shame, I like them. I contacted CD and they responded quickly. I did what they recommended and it did nothing. Thanks for the help
Jim

Sep 25, 2013 | 10:57 AM

#16

ChickinOnaChain

Big Kahuna HDF Member

Joined: Dec 2012

Posts: 322,622

Likes: 3,077

From: .....

Quote:

Originally Posted by kraydog

I was told by Custom Dynamics that to run their turn signal LEDS that you needed a load equalizer.

You really don't NEED the load equalizer. I'm running all four r/s/t lights and I never installed my load wire and my lights flash just fine. My dash light flashes fast but the lights themselves don't.