Fuel Filter Question?
Elite HDF Member
Joined: Jul 2008
Posts: 4,741
Likes: 45
From: Indian Land, SC
Drag Specialties makes a filter, line and oring kit for half the price of Harley. I am in the process of changing mine right now. Check the other fuel line in the tank for excess wear marks. You may need to change that too because the rubbing on the inside of the tank will create pin holes. If you do, drag specialties makes a kit that is much cheaper than Harley. The kit will come with a check valve and new plastic line. Good luck.
Cruiser
Joined: Jun 2010
Posts: 167
Likes: 0
From: Las Vegas
Fuel filter kit :0707-0011
Check valve kit :T03-0084
These parts are for 02-07 touring models with Delphi fuel injection. They may fit other models but I am not sure.
Last edited by 525tom; Oct 13, 2013 at 06:38 PM.
Seasoned HDF Member
Joined: Nov 2010
Posts: 17,548
Likes: 7,175
From: Oxford, Nc
Changed mine out at 92,000 miles. Filter was still fine but the plastic hoses looked hard and inflexible. Replaced the filter with a unit found on EBay for 1/2 price and used submersible neoprene hose ( R-10 only!) so that I wouldn't worry about plastic hose cracks anymore.
I reused the tank gasket and screws with no problem ( just don't let it get dry while its sitting out as it will stiffen up if you do.)
I reused the tank gasket and screws with no problem ( just don't let it get dry while its sitting out as it will stiffen up if you do.)
Cruiser
Joined: Sep 2010
Posts: 239
Likes: 1
From: billings,montana
fuel injection filters!
i love fuel injection! i worked as a tech for a ford dealership for two years, and we pushed new fuel filters to the customers all the time! fuel injection doesn't work with dirty fuel! i read all the posts, and i agree that if you get clean fuel, you don't need to change your fuel filter. you need a new fuel filter, if you buy dirty fuel! cheers from montana
Thread
Thread Starter
Forum
Replies
Last Post
DMetcalf
Ignition/Tuner/ECM/Fuel Injection
1
Sep 20, 2014 01:40 PM
