high beam headlight adjustment question
Thread Starter
|
Road Warrior
Joined: Oct 2009
Posts: 1,317
Likes: 16
From: Texas
high beam headlight adjustment question
I have my headlight adjusted where it should be but the high beams pretty much throw light straight down to sides and partly up in trees. Just no good to see road in front of you. Is my high beam shot out or is there some way to make adjustment on it? Its stock Harley bulb on a '10 flhx.
Is there a better light alternative for same price range as harley?
Is there a better light alternative for same price range as harley?
Cruiser
Joined: Apr 2009
Posts: 249
Likes: 46
From: Palm Coast, Florida
Go out on a dark non-busy road after dark and take a #2 Phillips screwdriver along with you. Adjust until you are satisfied. If you're interested in LED Lighting, the Trucklight 7 (TL7) is favored by many and is a very bright light source. Add the Trucklight Spots and life is better than ever. "Discount Fleet Supply" has the complete set (1-Headlight & 2-Spots) available for $369 with free shipping. I am not a player I the ballgame but just passing along the information. If you don't have spots, you can purchase just the Headlight from them too.
Road Captain
Joined: Feb 2006
Posts: 604
Likes: 64
From:
Make sure that the Headlight Bulb socket is seated in the headlight housing. Also check that the faring is seated and screwed in snugly, and then adjust per the Manual.
Last edited by Kenney; Nov 6, 2013 at 11:53 AM.
Thread
Thread Starter
Forum
Replies
Last Post
