I completed installing the Custom Dynamics LED signals (4) and matching laydown tailight. Very easy install as the inserts use a standard incandesent bulb base instead of making you install a new piece of hardware or rewire one. The level of brightness is amazingly bright. Paired with a run/brake/turn module, there is no way you will not be seen on the road. Excellent customer service and everyone there knows their stuff. Yes, if you replace all of the signals, you'll most likely need a load equalizer, but that is to be expected. All is explained on their website. I say this because the stealership will admit the lackluster brightness from the HD LED signals they sell (and will tell you they are an "improvement" over what they used to offer).
My decision to go with them was based largely upon the info in this fourm. I've no idea if they sponsor it or anything, but they make a fine product for less money than most others.
The first thing I did to my bike was the LED r/s/t lights too.
I left the load equalizer off. All it does is to keep the dash light from flashing fast but it doesn't effect the lights themselves, so I didn't bother with it.