07 RKC Dyno Results
Thread Starter
|
Cruiser
Joined: Apr 2006
Posts: 142
Likes: 0
From:
07 RKC Dyno Results
I had my Dealer add Rinehart Slip On's, SERT, and A/F upgrade to my 07 RKC. ( $1400)The Dyno results were :
73.13 HP
87.10 Ft lbs Max torque
It was raining so I didn't get to ride the bike. But at idle it sounds good. I cracked it a couple of times and it sounded real good. Do the above power readings sound about right to you experts ?
CJ
73.13 HP
87.10 Ft lbs Max torque
It was raining so I didn't get to ride the bike. But at idle it sounds good. I cracked it a couple of times and it sounded real good. Do the above power readings sound about right to you experts ?
CJ
Seasoned HDF Member
Joined: Oct 2006
Posts: 5,977
Likes: 85
From: Nevada
RE: 07 RKC Dyno Results
Mine dynoed at 73hp and 84 tq with V&H ovals, a/c and PC111.
Have seen some at78 hp and 95tq so I don't know
if we are good or not.
I took an average of 5 dynos on stock motorsfrom 2 magazines.
66hp/80tq.
Seems to me that our hp gain is a bit high but our torque gain
(at least in my case) is a bit low compared to those numbers.
I guess it comes down to having confidence in your tuner.
Have seen some at78 hp and 95tq so I don't know
if we are good or not.
I took an average of 5 dynos on stock motorsfrom 2 magazines.
66hp/80tq.
Seems to me that our hp gain is a bit high but our torque gain
(at least in my case) is a bit low compared to those numbers.
I guess it comes down to having confidence in your tuner.
Thread
Thread Starter
Forum
Replies
Last Post
