clamp for Paul Yaffe touring bars
Outstanding HDF Member
Joined: Jun 2011
Posts: 2,023
Likes: 6
From: New Jersey
Get the 1-piece top clamp. Get the poly riser bushings.
Outstanding HDF Member
Joined: Jun 2011
Posts: 2,023
Likes: 6
From: New Jersey
Get the 1-piece top clamp. Get the poly riser bushings.
Road Captain
Joined: Jul 2014
Posts: 721
Likes: 18
From: Galesville, WI
I am in the process of putting those exact bars on my '91 EGC. Here's a pic of about where they will wind up. Pretty much right at the top of the wings on the fairing. I am hoping hands will still be out of the wind. I do however have to pull them back just a bit to make clearance for the windshield, so they should get a tad lower yet. I am very happy with the placement. I am also putting on all new cables and hoses +6". Wiring will also be extended. Some have said that stock stuff would all work with these bars. I however don't really see how that would have worked, in my case anyways. Wires would be at the very max and I wouldn't be able to route them along, or inside the bars which is what I plan on. The +6" should be about perfect.
Last edited by DeputyLoud; Feb 17, 2015 at 01:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
DR. V-TWIN
Sportster Models
21
May 28, 2012 07:53 PM
