2014 Street Glide Issues
Thread Starter
|
Cruiser
Joined: Apr 2014
Posts: 126
Likes: 0
From: Michigan
Alright - First thing we did was disconnect the negative, and left it disconnected while we finished putting together the rest of the fearing, and checked all the connection. Once we connected the negative again, she cycled normally with the key on, and fired right up.
I have a feeling it was something that wasn't plugged in all the way, or pulling the negative reset everything. In any event, shes all set. Thanks for the suggestions guys!
I have a feeling it was something that wasn't plugged in all the way, or pulling the negative reset everything. In any event, shes all set. Thanks for the suggestions guys!
Road Master
Joined: Nov 2013
Posts: 756
Likes: 4
From: NY NY
Yes....have had my front fairing completely dissasembled...3 times I taped ALL wires with masking tape and upon disconnect on BOTH ends and numbered 1 1, 2 2, 3 3....etc so I knew what went to what and when I may have missed something because there are 48,843 connectors 
I am sure it's something very simple.
I am sure it's something very simple.
Cruiser
Joined: Jan 2013
Posts: 139
Likes: 45
From: Huntington New York
Try entering the alarm code, every once in a while I have the same issue with my 2011 road king, battery was dead in key fob use the manual entry of alarm code & keep some spare batteries on your bike.
Thread
Thread Starter
Forum
Replies
Last Post
Fleetmgr
Touring Models
15
Sep 16, 2018 06:17 PM
