keith black pistons
Thread Starter
|
Road Captain
Joined: Apr 2006
Posts: 654
Likes: 0
From:
keith black pistons
Looking to use the kb348 pistons on my 95 build. Has anyone else used these and if so, are there any special instructions I need to know prior to ordering? I have been trying to locate a set of directions that come with the pistons but I'm not having much luck. Are the instructions pretty good on what exactly needs to be done to install them correctly?
Ultimate HDF Member
Joined: Feb 2006
Posts: 5,939
Likes: 3
From: TX
RE: keith black pistons
No special directions....
The pistons should include rings, wristpins, & clips.
The HD SVC manual has ring orientation and endgap specs. They will be fine to use with the KB's too....
The pistons should include rings, wristpins, & clips.
The HD SVC manual has ring orientation and endgap specs. They will be fine to use with the KB's too....
Thread Starter
|
Road Captain
Joined: Apr 2006
Posts: 654
Likes: 0
From:
RE: keith black pistons
Thanks Phil. It seems the KB pistons have a tighter clearance inside the jugs then most other pistons. I thought I read somewhere that there were more rings included with the KB and just wanted to make sure the instructions were specific as to where they go.
Thread
Thread Starter
Forum
Replies
Last Post
